6-Axis Wheel Force Sensor (WFS)
Part of the A&D VMS system, the A&D wheel force sensor (WFS) is a high-accuracy, 6-axis wheel force measurement system for real-time measurement of forces (Fx, Fy, Fz) and moments (Mx, My, Mz) acting on the wheel hub under dynamic conditions. If you’re looking for a wheel force transducer, look no further than A&D Technology!
6-Axis Wheel Force Sensor
Part of the A&D VMS system, the A&D wheel force sensor (WFS) is a high-accuracy, 6-axis wheel force measurement system for real-time measurement of forces (Fx, Fy, Fz) and moments (Mx, My, Mz) acting on the wheel hub under dynamic conditions. The WFS uses distributed force bridges for measurement and model-based decomposition in the digital signal processor (DSP) for obtaining individual force and moment components. This method provides extremely low-cross sensitivity, interference & temperature sensitivity while still maintaining a high sampling rate. In addition to providing the highest accuracy and response rate, the WFS is also capable of compensating for tire uniformity characteristics in real-time to provide the ultimate in force and torque measurement. An important addition
The WFS can be customized to meet your specific application needs (size, rating, resolution, etc.).
An Element of A&D’s Vehicle Measurement System.
- High-accuracy real-time measurement of forces and moments acting on the wheel hub under dynamic conditions
- Based on A&D’s distributed force detection method which uses four-element strain gauges
- Utilizes MATLAB/Simulink models
- Rated Capacity: Fx=24 kN, Fy=15 kN, Fz=24 kN, Mx=4.5 kNm, My=4 kNm, Mz=4.5 kNm
- Force Resolution: 6N (1/4000 of Operating range)
- Moment resolution: 1.8Nm
- Maximum Speed: 2000 RPM
- Temperature Compensation Range: -10 to 80 °C (14 to 175 °F)
- Zero Effect: 0.005 %RO/°C
- Span Effect: 0.005 %/°C
- Sensor Weight: 3.2 kg (7.05 lb)
Related Products
Vehicle Measurement System (VMS)
The A&D Vehicle Measurement System is a collection of embedded controllers and high-accuracy sensors acquiring synchronized vehicle dynamics test data under various real-world conditions.
Rotational Torque Sensor (RTS)
The AD7832 Rotating Torque Sensor (RTS) enables non-contact torque measurement at high-speed with high resolution.
Force Matrix Sensor
The A&D Force Matrix Sensor (FMS) measures the three component forces, longitudinal, lateral and radial, that occur where the tire contacts the road.
Wheel Position Sensor (WPS)
The Wheel Position Sensor (WPS), is a high-accuracy system that records tire position by gathering data measured against a reference point on the vehicle body.
Vehicle Measurement System (VMS)
The A&D Vehicle Measurement System is a collection of embedded controllers and high-accuracy sensors acquiring synchronized vehicle dynamics test data under various real-world conditions.
Rotational Torque Sensor (RTS)
The AD7832 Rotating Torque Sensor (RTS) enables non-contact torque measurement at high-speed with high resolution.
Force Matrix Sensor
The A&D Force Matrix Sensor (FMS) measures the three component forces, longitudinal, lateral and radial, that occur where the tire contacts the road.
Wheel Position Sensor (WPS)
The Wheel Position Sensor (WPS), is a high-accuracy system that records tire position by gathering data measured against a reference point on the vehicle body.
Get In Touch
SALES: (734) 822-9502
SUPPORT: (734) 822-9556
Location
4622 Runway Blvd
Ann Arbor, MI 48108
Email
contact@aanddtech.com
Open Hours
Mon: 8am – 5pm
Tue: 8am – 5pm
Wed: 8am – 5pm
Thur: 8am – 5pm
Fri: 8am – 5pm
Sat: Closed
Sun: Closed
Send a Message
Get In Touch
SALES: (734) 822-9502
SUPPORT: (734) 822-9556
Location
4622 Runway Blvd
Ann Arbor, MI 48108
contact@aanddtech.com
Open Hours
Mon: 8am – 5pm
Tue: 8am – 5pm
Wed: 8am – 5pm
Thur: 8am – 5pm
Fri: 8am – 5pm
Sat: Closed
Sun: Closed
