loader image

Combustion Analysis | Portable/In-Vehicle

The Phoenix C3 is a compact, configurable, combustion analysis system ideally suited for in-vehicle testing, or any application with a low channel count. Portable Combustion Analysis starts with Phoenix C3.

Detail Your Project
Combustion Analysis
Combustion Analysis
Portable Combustion Analysis
Portable Combustion Analysis

Portable/In-Vehicle
Combustion Analysis

The Phoenix C3 is a compact, configurable, combustion analysis system ideally suited for in-vehicle testing, or any application with a low channel count. Representing the next generation in combustion analysis, the Phoenix C3 is configurable through any device with a web browser, eliminating the need for a laptop.

Once it is configured, it runs automatically, requiring no babysitting. The Phoenix C3 also provides seamless integration with industry-standard ECU calibration tools, supports infinite streaming, and the large data storage capacity provides the ability to perform extended test procedures, such as FTP75, without interruption.

  • Real-time evaluation of the combustion process with immediate feedback for controls development
  • Headless operation does not require a connected PC to acquire and process data
  • Compact design is ideal for on-board testing applications
  • Built-in web-based configuration and operation requires only a browser for setup

 

 

Category

Feature

Phoenix C3

High-Speed
Analog
Inputs
# Channels 2 on main processor
4 per input module
Up to 12 channels
Resolution 16-bit
Acquisition Rate 8,000 RPM at 0.1°
2 MHz
Low-pass filters None, 12.5kHz, 25kHz, 50kHz
Input Ranges ± 1 V, ± 5 V, ± 10 V
Input Impedances 10 kΩ, 100 kΩ, 1 MΩ, 10 MΩ
Low-Speed Analog Inputs # Channels 2
Resolution 12-bit
Acquisition Rate 8,000 RPM at  1.0°
500 KHz
Input Ranges ± 10 V
Digital
Inputs
# Channels
(Up to four used by an encoder)
4 inputs or 4 outputs
4 per module, up to 12
Input Ranges ± 5 V
Maximum Encoder Resolution 0.1°
Digital
Outputs
# Channels
Update Rate
Data  & Analysis Analysis Method Real-time cycle-by-cycle data is streamed to the DSP core on board Phoenix C3 for analysis
Analysis rate without missing an engine cycle 8,000 RPM at 0.1°
System Memory 1 GB (plus SD card for data storage)
Non-volatile logging SD
Test Bench Interfaces XCP & CANbus
Host PC Connection 1 Gigabit Ethernet
Headless Operation Yes
Power &
Mechanical
Input Power 9-30 volts DC (20 watts @ 12VDC)
120/240 V 50/60 HZ VAC external power supply
Dimensions (Single Module) 165mm (W) x 197mm (D) x 45mm (H)
6.5″ (W) x 7.75″ (D) x 1.75″ (H)
Weight (Single Module) CPU board 1.0 kg (2.2 lb.)
Add-on board 0.6 kg (1.4 lb.)
Environmental Operating temperature -40 °C to 70 °C (-40 °F to 158 °F)
Operating  humidity 0% to 95% humidity non-condensing

* Specifications subject to change without notice

© Copyright – A&D Company Ltd.

  • Available in 4, 8 and 12 high-speed channel configurations
  • Headless operation -configurable through any device with a web browser
  • Small footprint
  • Stackable design
  • Seamless integration with ETAS INCA calibration tools

  • Ideal for in-vehicle applications
  • Lightweight, portable design frees up valuable real estate
  • Headless operation eliminates the need for a laptop
  • INCA integration eliminates the need for post processing
  • Runs automatically; no babysitting required
  • Stackable, screwless design eliminates need for tools

Complete the form then click the 'download' button for the flyer.

Related Products

Combustion Analysis Software

The Phoenix Combustion Analysis Soft­ware (CAS) provides the ability to config­ure the system hardware based on the specific testing needs of the application.

Combustion Analysis |
Lab Setting

The A&D Phoenix combustion analysis product line offers the ideal instruments for optimal engine calibration and can support 48 channels.

Lab Management Tools

LabWorX Suite of products will transform a collection of test systems into one managed lab. 

Lab Management with LabWorX

Combustion Analysis Software

The Phoenix Combustion Analysis Soft­ware (CAS) provides the ability to config­ure the system hardware based on the specific testing needs of the application.

Combustion Analysis |
Lab Setting

The A&D Phoenix combustion analysis product line offers the ideal instruments for optimal engine calibration and can support 48 channels.

Lab Management with LabWorX

Lab Management Tools

LabWorX Suite of products will transform a collection of test systems into one managed lab. 

Get In Touch

United States | Ann Arbor, MI
OPEN MONDAY-FRIDAY 8am-5pm ET
 

SALES: (734) 822-9502

SUPPORT: (734) 822-9556

 

Location

4622 Runway Blvd
Ann Arbor, MI 48108

Email

contact@aanddtech.com

A&D Europe | United Kingdom

Location

24 Blacklands Way
Abingdon, Oxfordshire OX14 1DY United Kingdom

 

Phone:

+44 (1235) 55 04 20 Ext 131

 

Email:

ptservice@aanddeurope.com

Send Us a Message

Download Product Brochure

Enter the following information to download the A&D Product Brochure!

Download Here

DownloadLabWorX Brochure

Enter the following information to download the LabWorX Product Brochure!

Download Here

Eddy Current Dyno Controller

A&D's Dual-Loop Dyno Controller

Enter the following information to activate the download button

Download Here