loader image
Select Page

Automotive Testing Solutions

Test for today. Develop for tomorrow.


Automotive Testing Solutions


A&D Technology is focused on providing the necessary tools, including industry leading technology for engine testing and development. Regulatory and economic forces continue to drive powertrain development to produce more fuel efficient engines that emit fewer greenhouse gasses.

The simplest solution would be to build smaller, less powerful engines, but today’s customer will not accept such a compromise. Furthermore, while electrification is a valid alternative, it is rather expensive, and will continue to be so for the foreseeable future. As a result, OEMs must still produce green, efficient, powerful, and economical gasoline and diesel engines to remain competitive.

A&D Technology has developed a suite of products that help OEMs adapt to ongoing alterations in the development landscape, offering unique and tailored solutions for testing and development.  

Automotive Testing Starts here…

A&D Technology is your solution provider for all things related to Automotive Testing.


Battery Test Automation & Lab Management

iTest Battery

iTest Battery includes proven drivers for seamless integration with best-in-class testing components, such as power process systems, air coolant systems, battery ECUs (BMS), chiller systems and environmental chambers.

iConnect X-Series for Test Automation

iConnect X-Series I/O module provides synchronized data acquisition in a distributed test environment at high data sampling rates with the flexibility of EtherCAT. An important module for any suite of test automation equipment.

iConnect X-Series I/O Module Test Automation Equipment

Uniplot Reporting

UniPlot is a powerful tool that enables you to visualize and analyze test data. 

Lab Management Tools (LabWorX)

LabWorX Suite of products will transform a collection of test systems into one managed lab.


Real-time Simulation & Control (Lab)

Procyon is a high-speed real-time simulation and control platform, customizable for a diverse range of applications in a Lab Setting.

ECU & Engine HILS (Hardware-in-the-Loop Simulation)

Ideal platform for large-scale HILS systems and integrated HILS systems.

(Hardware-in-the-Loop Simulation)

BMS Hardware-in-the-Loop Simulation (HILS) system will help shorten the development cycle of a BMS system.

Real-Time Simulation & Control (Portable)

ADX is a high-speed measurement and control system that can be customized for a wide variety of applications from any testing environment.

Combustion Analysis & Calibration

Combustion Analysis Software

The Phoenix Combustion Analysis Soft­ware (CAS) provides the ability to config­ure the system hardware based on the specific testing needs of the application.

Combustion Analysis (Portable/In-Vehicle)

The Phoenix C3 is a compact, configurable, combustion analysis system ideally suited for in-vehicle testing, or any application with a low channel count. 

Combustion Analysis (Lab Setting)

The A&D Phoenix combustion analysis product line offers the ideal instruments for optimal engine calibration and can support 48 channels.

Automated Calibration

It facilitates the calibration process by taking control of both the ECU calibration system and the test cell control system to run experiments as part of an automated calibration process.

Tire Testing & Vehicle Measurement

Rolling Resistance Test Rig (RRTR)

RRTR is a high-accuracy drum-based rolling resistance test machine. The RRTR offers world class repeatability and accuracy through its rigid design and a customized load cell developed using our Model-Based Sensor (MBS) technology. 

Dynamic Contact Force Rig (DCFR)

DCFR is the new standard in tire testing technology that combines a fully dynamic tire test rig with tire patch measurement sensors. 

Flat Belt Tire Test Rig (FBTTR)

The A&D Flat Belt Tire Test Rig is an indoor tire force and moment testing machine. It allows the tire to be tested against a flat surface under dynamic conditions.

Vehicle Measurement System (VMS)

The A&D Vehicle Measurement System is a collection of embedded controllers and high-accuracy sensors acquiring synchronized vehicle dynamics test data under various real-world conditions.

Emissions Measurement

In-Vehicle Emissions Testing

The BOB-1000FT is the only FTIR system optimized for use on-board, and includes integration of data from the ECU, weather data, GPS data and time-aligned video.

In-Cell Emissions Testing

BEX-1000FT, a multi-component gas analyzer based on Fourier Transform Infrared (FTIR) technology, allows for the continuous raw or dilute measurements of up to 40 gases using one device.

Test Automation & Lab Management

iTest Application

The iTest Application offers a wide range of functionality for Test Automation. This family of applications include: iTest Battery, iTest Pro, iTest Standard, iTest Micro and iTest Racing. iTest will configure to any application!

iConnect I/O for Test Automation

Through its state-of-the-art design and open system architecture iConnect delivers high accuracy and stability, along with the ability to adapt to specific testing needs.

Uniplot Reporting

UniPlot is a powerful tool that enables you to visualize and analyze test data. 

Lab Management Tools (LabWorX)

LabWorX Suite of products will transform a collection of test systems into one managed lab.

Dynamometers & Dyno Controllers


The comprehensive Performance Line includes a solution for all of the tasks of a modern and efficient test field, from durability, vehicle simulation, and high dynamic transient to high-speed e-motors.

Dual-Loop Dyno Controller

A&D’s Dual-Loop Dyno Controller is an industry standard, with over 700 Installed Globally. Our Dyno Controller will replace your existing system and integrate without issue.

Get In Touch

United States | Ann Arbor, MI

SALES: (734) 822-9502

SUPPORT: (734) 822-9556



4622 Runway Blvd
Ann Arbor, MI 48108



A&D Europe | United Kingdom


24 Blacklands Way
Abingdon, Oxfordshire OX14 1DY United Kingdom



+44 (1235) 55 04 20 Ext 131




A&D Europe | Germany


Berliner Allee 65
D-64295 Darmstadt



+49(6151) 397 52 50


+49(6151) 397 51 00




Send Us a Message

Download Product Brochure

Enter the following information to download the A&D Product Brochure!

Download Here

DownloadLabWorX Brochure

Enter the following information to download the LabWorX Product Brochure!

Download Here

Eddy Current Dyno Controller

A&D's Dual-Loop Dyno Controller

Enter the following information to activate the download button

Download Here