Rotational Torque Sensor (RTS)
The AD7832 Rotating Torque Sensor (RTS) leverages A&D’s experience in distributed force detection, high-speed telemetry and digital signal processing technology to enable non-contact torque measurement at high-speed with high resolution.
Rotational Torque Sensor (RTS)
The AD7832 Rotating Torque Sensor (RTS) leverages A&D’s experience in distributed force detection, high-speed telemetry and digital signal processing technology to enable non-contact torque measurement at high-speed with high resolution. With certain models, rotational speed and angle can also be measured.
- Dual range capability, where the full scale can be reduced to 1/5 of the rated capacity with the same accuracy.
- Uses distributed force detection technology to achieve high accuracy.
- Withstands torsion and bending, as well as severe radial and thrust load conditions
- Typical system configuration for torque, speed and angle measurement
- Enables non-contact torque measurement at high speed with high accuracy using distributed force detection technology
- Nominal torque: 200, 500, 1K, 2K, 5K Nm
- Combined error: 0.03% full scale
- Maximum speed: 12000rpm /10000 rpm
- Dual range option -full scale at 1/5 the rated capacity
- Non-contact sensor based on high-speed telemetry technology
- Total digital control from high-speed digital response
- Model-based calculations
DUAL RANGE MODELS |
||
|---|---|---|
| AD7832B-200D1 | 200/40 Nm | 12,000 rpm |
| AD7832B-500D1 | 500/100 Nm | 12,000 rpm |
| AD7832B-1KD1 | 1K/200 Nm | 12,000 rpm |
| AD7832B-2KD1 | 2K/400 Nm | 10,000rpm |
| AD7832B-5KD1 | 5K/1 KNm | 10,000rpm |
STANDARD MODELS |
||
|---|---|---|
| AD7832B-200 | 200 Nm | 12,000 rpm |
| AD7832B-500 | 500 Nm | 12,000 rpm |
| AD7832B-1K | 1 KNm | 12,000 rpm |
| AD7832B-2K | 2 KNm | 10,000 rpm |
| AD7832B-5K | 5 KNm | 10,000 rpm |
Related Products
6-Axis Wheel Force Sensor (WFS)
A&D’s wheel force sensor (WFS) is a high-accuracy, 6-axis wheel force measurement system for real-time measurement of forces (Fx, Fy, Fz) and moments (Mx, My, Mz) acting on the wheel hub under dynamic conditions.
Rotational Torque Sensor (RTS)
The A&D Vehicle Measurement System is a collection of embedded controllers and high-accuracy sensors acquiring synchronized vehicle dynamics test data under various real-world conditions.
Force Matrix Sensor
The A&D Force Matrix Sensor (FMS) measures the three component forces, longitudinal, lateral and radial, that occur where the tire contacts the road.
Wheel Position Sensor (WPS)
The Wheel Position Sensor (WPS), is a high-accuracy system that records tire position by gathering data measured against a reference point on the vehicle body.
6-Axis Wheel Force Sensor (WFS)
A&D’s wheel force sensor (WFS) is a high-accuracy, 6-axis wheel force measurement system for real-time measurement of forces (Fx, Fy, Fz) and moments (Mx, My, Mz) acting on the wheel hub under dynamic conditions.
Rotational Torque Sensor (RTS)
The A&D Vehicle Measurement System is a collection of embedded controllers and high-accuracy sensors acquiring synchronized vehicle dynamics test data under various real-world conditions.
Force Matrix Sensor
The A&D Force Matrix Sensor (FMS) measures the three component forces, longitudinal, lateral and radial, that occur where the tire contacts the road.
Wheel Position Sensor (WPS)
The Wheel Position Sensor (WPS), is a high-accuracy system that records tire position by gathering data measured against a reference point on the vehicle body.
Get In Touch
SALES: (734) 822-9502
SUPPORT: (734) 822-9556
Location
4622 Runway Blvd
Ann Arbor, MI 48108
Email
contact@aanddtech.com
Open Hours
Mon: 8am – 5pm
Tue: 8am – 5pm
Wed: 8am – 5pm
Thur: 8am – 5pm
Fri: 8am – 5pm
Sat: Closed
Sun: Closed
Send a Message
Get In Touch
SALES: (734) 822-9502
SUPPORT: (734) 822-9556
Location
4622 Runway Blvd
Ann Arbor, MI 48108
contact@aanddtech.com
Open Hours
Mon: 8am – 5pm
Tue: 8am – 5pm
Wed: 8am – 5pm
Thur: 8am – 5pm
Fri: 8am – 5pm
Sat: Closed
Sun: Closed
